PROJECT GALLERY — 2.0L

914-6 GT VINTAGE BUILD | 2.0L | 901

Posted by MARKETING PATRICK MOTORSPORTS on

914-6 GT VINTAGE BUILD | 2.0L | 901

914-6 GT Vintage racer, ready for racing HSR, VARA, SVRA with a twin plug 2.0L engine & 901 gearbox. We have finished all the metal work & most of the body fitment on our fixture table, now it's going on the rotisserie for inner fender detailing & belly pan metal work             Here the 914-6 GT rear quarter flare has been hand fitted with hammer & dolly to mate up to the chassis prior to being cut off with the original flare. this will allow us to "butt" weld the GT flare back on the...

Read more →

914-6 GT RESTORATION - RACE CAR | 2.0L | 901

Posted by MARKETING PATRICK MOTORSPORTS on

914-6 GT RESTORATION - RACE CAR | 2.0L | 901

This original 914-6 came to us for a complete restoration & 914 6 GT conversion. The car was stuffed in the back of a small U-Haul box truck without suspension. The 2.0L engine was period correct and was completely blueprinted and updated with the 2.0L "S" 9.8:1 compression ratio piston and cylinder set. We also updated to big valve heads which required the intake valve pockets on the piston domes to be machined for proper valve clearance. Twin plugged of course, along with our special twin plug distributor system. The original 906 center feed cams that were supplied for the...

Read more →

914 6 - 2.0L RACE CAR - HSR CHAMPION | SOLD 2013

Posted by MARKETING PATRICK MOTORSPORTS on

914 6 - 2.0L RACE CAR - HSR CHAMPION | SOLD 2013

This is a 914-6 2.0L HRS Challenge race car we built for a local customer here in Phoenix. He has successfully raced it across the country for the last 6 years. Including a HSR West 2.0L Challenge Championship Winner. We started with a very straight & completely rust free southwest car, completely stripped the car and started extensive chassis reinforcement & front to rear roll cage safety system. One thing you have to look carefully to see is the tilted back front windshield "our little trick". This works with a std. 914 glass windshield. FOR SALE | Porsche 914-6 2.0L Race...

Read more →

1965 911 FIA VINTAGE RACE CAR - 2.0L - 901

Posted by MARKETING PATRICK MOTORSPORTS on

1965 911 FIA VINTAGE RACE CAR - 2.0L - 901

This 1965 911 is the # 595 produced. We have completely disassembled the chassis, and prepared the main chassis & all steel body components for acid stripping!  Neutralized & sealed with a High Zinc primer, then we stitch welded the entire chassis.  We designed & built a complete chassis roll cage system to meet FIA specifications, the customer requested removable door bars.                Our newly designed fuel cell with FUEL SAFE, a true center fill SA 100 with filler cap trap package. We have these in stock! Pre assembly of the '65 2.0L engine case...

Read more →

914-6 2.0L - VINTAGE RACER

Posted by MARKETING PATRICK MOTORSPORTS on

914-6 2.0L - VINTAGE RACER

This car was built to race in the HSR WEST 2.0L PORSCHE VINTAGE Challenge. 2.0L single plug, 12.5 CR, 40MM PMO carbs, billet rods, 906 style cams, andall the little details in-between. 901 side shift trans., 904 mainshaft, billet intermediate case section, all special close ratio gear sets, oil cooling system & 5 point return system, along with a billet torque bias diff. THIS PICTURE SHOWS THE RIGHT SIDE OF THE ENGINE CARRIER MOUNT - PORSCHE 914 BULK HEAD TO PORSCHE 6 CYLINDER ENGINE CONVERSION - UTILIZES POLYURETHANE BUSHINGS - TIG WELDED STEEL - BLACK POWDER COAT FINISH - 13.50...

Read more →