PROJECT GALLERY — 3.2L DME

1975 914-4 to 3.2L CONVERSION & RESTORATION

Posted by MARKETING PATRICK MOTORSPORTS on

1975 914-4 to 3.2L CONVERSION & RESTORATION

  This 1975 914-4 was converted to a 914-6 with a 3.2L DME motronic engine, 901 5 speed trans with Wavetrac ATB diff, sport headers & exhaust, backdated bumpers, upgraded suspension & brakes, and a hidden front oil cooler. The end result is a slick, understated classic with nearly triple the stock power! Stripped down, the engine bay needed to be perfected before anything new could go in.We blanket the car in 3M, specially designed to protect the body and paint from welding sparks. Jess working his magic in the engine bay, spotting and replacing any rust spots with new metal....

Read more →

914-6 GT RACE CAR CONVERSION | 3.2L DME | 915 TRANS

Posted by MARKETING PATRICK MOTORSPORTS on

914-6 GT RACE CAR CONVERSION | 3.2L DME | 915 TRANS

This "GT" race replica was built exclusively at the PATRICK MOTORSPORTS workshop in Phoenix, Arizona, USA.   When a fuel cell is wanted or required there is no finer choice than a Fuel Safe fuel cell. They are used and approved by all sanctioning bodies in every racing application from off road to Indy. If you are looking for a fuel cell, Fuel Safe should be your first and only choice!As you can see the front trunk is the heart of our dry sump oil cooling system. This starts out with a Peterson OIL TANK part# OIL 08-0011-DB - 16...

Read more →

914-6 - 3.2L DME

Posted by MARKETING PATRICK MOTORSPORTS on

914-6 - 3.2L DME

IF YOU LOOK CLOSELY YOU CAN SEE OUR BOLT IN FRONT ENGINE MOUNT (PART # PMP9146FIWAMO) ENGINE CARRIER MOUNT - PORSCHE 914 BULK HEAD TO PORSCHE 6 CYLINDER ENGINE CONVERSION - UTILIZES POLYURETHANE BUSHINGS - TIG WELDED STEEL - BLACK POWDER COAT FINISH - 13.50 LBS. THESE MOUNTS ARE A MUCH IMPROVED DESIGN OVER THE STOCK FACTORY CROSS BAR AND WITH THE DELRIN BUSHINGS OVER THE FACTORY RUBBER WILL LAST MANY TIMES LONGER. THIS ALSO GIVES YOUR ENGINE CONVERSION A MUCH CLEANER APPEARANCE.THE EXHAUST HEADERS ARE PORSCHE 914-6 - WITH HEAT EXCHANGERS - 1-5/8 (1.625) INCH O.D. PRIMARIES - 304 STAINLESS...

Read more →

1974 911 CARRERA | 3.2L DME | 915

Posted by MARKETING PATRICK MOTORSPORTS on

1974 911 CARRERA | 3.2L DME | 915

This '74 Carrera was located by myself in Burbank, Ca. in '96, only 68,000 miles and complete but in need of a restoration. We stripped the car and started the process. We started with an '80 3.0L engine, 3.2L 41mm port heads, Cosworth Lightweight piston set, 993 Sport cams, B&B stainless headers w/ heat & dual-in dual-out exhaust system, and fitted the engine with 3.2L Digital Motronic Electronics (DME). We tuned the engine with the help of "Autothority" and their Mass Air Flow system. Then trimmed it out in black & yellow powder coating. The pkg. is tight & clean, and makes...

Read more →