Cart 0

9 Bolt 240mm RSR Flywheel With Stage 2 G50 SBH Sport Clutch Package (PKG 950SBH 9RSR KS2 OS PMS

Patrick Motorsports

  • Save $188
Shipping calculated at checkout.

9 Bolt 240mm RSR Flywheel With Stage 2 G50 SBH* Sport Clutch Package (*Shortened Bell Housing / Cut / Machined)

This Package Gives Reduced Rotating Mass For Quicker Engine Acceleration And Increased Durability For Sport Driving.

1965-1989 Porsche 911 Chassis
1978-1989 Porsche 911 SC / Carrera / 930 Engine 
G50 Shortened Bell Housing (Cut / Machined)

Complete Package includes:

Patrick Motorsports Exclusive Lightweight 9 Bolt 240mm RSR Flywheel - For 1978-1989 Porsche 911 / 930 3.2L EFI Conversions / 964 / 993 3.6L DME Motronic Conversions - 240mm 9 Bolt Crankshaft - G50 Transmission - Billet Steel - Precision Machined In-House - Certified Balanced - With Installed Low Profile RS Pilot Bearing - Weight: 7.50 Lbs. (3.40 Kg.) - Replaces Part Numbers: 930 102 042 00 - 50mm 3 Bolt Pilot Bearing - Replaces Part Numbers: 930 102 033 03 - OE Flywheel - 10.65 Lbs. (4.83 Kg) Application Notes: Designed For Direct Replacement Of Part Numbers: 911 102 033 03 – Flywheel - includes Original Crank Position And Timing Reference Mark Features.

KEP Lightweight Stage 3 Sport Clutch Pressure Plate - 240mm - For 1987-1989 Porsche 911 / G50 Transmission - Weight: 13.25 lbs (vs OE Weight: 21.45 lb) - Lightweight Forged Aluminum Cover / Iron Plate - HD Triple Drive Straps And Rivets - KEP

OEM Starter Ring Gear - Weight 1.95 lb

Porsche Genuine Clutch Disc - With Torsion Spring Hub and Organic Face - Weight: 3.98 lb

OEM Sachs Clutch Release Bearing - 32mm ID - Weight 1.34 lb

OEM Sebro Guide Tube - 32mm OD Updated Type 

(QTY 9) OEM M10 Flywheel Bolts - Torque Spec 90Nm (65 Ft. Lb) 

(QTY 9) Low Profile HD M8 Pressure Plate Bolts - Torque Spec: 25 Nm (18 Ft Lb)

(QTY 9) HD Reinforced Steel M8 Pressure Plate Washers - Schnorr Type

Certified Computerized Assembly Balancing - Flywheel, Pressure Plate, and Ring Gear Assembly (No Additional Cost).

NOTE: The Flywheel Crank Reference Sensor Gap Should Be Between 0.028" to 0.032" (0.8mm)

 


Alternate Part Numbers: PKG 950 9EFIDME KS3 OS PMS / PKG.950.9EFIDME.KS3.LW.PMS  / PKG-950-36DME-K3-LW-PMS / PKG95036DMEK3LWPMS

PREVIOUSLY PMS STAGE 2

WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV

01/19/2026

We Also Recommend

Early 911 915 6 Bolt 225mm Flywheel With 60-2 DME Tooth Timing For EFI Conversions (FLW 911 102 201 12 602 PMS)

Early 911 915 6 Bolt 225mm Flywheel With 60-2 DME Tooth Timing For EFI Conversions (FLW 911 102 201 12 602 PMS)
Porsche 911 EFI / 964 993 3.6L DME Engine Conversion Flywheel With 225mm 915 Sachs Power Clutch Package (PKG 915 225 9EFIDME SPC PMS / PKG 915 225 36DME SPC PMS)

Porsche 911 EFI / 964 993 3.6L DME Engine Conversion Flywheel With 225mm 915 Sachs Power Clutch Package (PKG 915 225 9EFIDME SPC PMS / PKG 915 225 36DME SPC PMS)
6 Bolt 240mm Billet Flywheel With DME 60-2 Tooth Timing Reference For 1975-1977 911 Turbo Carrera 3.0L (FLW 930 102 201 01 602 PMS)

6 Bolt 240mm Billet Flywheel With DME 60-2 Tooth Timing Reference For 1975-1977 911 Turbo Carrera 3.0L (FLW 930 102 201 01 602 PMS)

Save $63.63
PKG.964.993.RS.LWCK.PMS 964 993 EURO RS FLYWHEEL & CLUTCH PACKAGE PKG964993RSLWCKPMS IMG_0093

964 993 Euro RS Lightweight Clubsport Single-Mass Flywheel and Clutch Conversion Package (PKG 964 993 RS LWCK PMS)

Save $549.81
NEW STOCK! 60-2 Tooth 9 Bolt 225mm EFI DME Conversion Sport Flywheel For 915 / 901 / 911 Transaxles (FLW 225 9EFI DME602 PMS / FLW 225 36DME LW PMS)

NEW STOCK! 60-2 Tooth 9 Bolt 225mm EFI DME Conversion Sport Flywheel For 915 / 901 / 911 Transaxles (FLW 225 9EFI DME602 PMS / FLW 225 36DME LW PMS)